S32750 Super Duplex Steel Threaded Flanges

Qingyan S32750 Super Duplex Steel Threaded Flanges are used to connect pipes with threaded ends in a piping system.

Here are the general steps for using:

1. Prepare the pipes: Ensure that the ends of the pipes to be connected are clean and free from any debris, rust, or contaminants.

2.Apply sealant: Apply an appropriate thread sealant, such as PTFE tape or pipe dope, on the male threads of the pipe. This will help to create a leak-tight seal when the flange is threaded onto the pipe.

3.Align the flanges: Hold the S32750 Super Duplex Steel Threaded Flanges against the pipe ends and align them properly. Make sure that the bolt holes on the flanges match with each other and with the holes on the connecting pipes.

4.Start threading the S32750 Super Duplex Steel Threaded Flanges onto the pipe ends by hand, making sure to keep them aligned.

5.Install gaskets: Place a suitable gasket between the mating S32750 Super Duplex Steel Threaded Flanges to ensure a proper seal. The type and thickness of the gasket should be chosen according to the specific application and operating conditions.

6.Install bolts and nuts: Insert bolts through the bolt holes on the flanges and tighten the nuts securely using a torque wrench or a suitable tool.

7.Inspect and test: Once the S32750 Super Duplex Steel Threaded Flanges are installed, visually inspect for any leaks, misalignments, or other issues. Also, perform pressure testing as per the applicable standards and procedures to ensure the integrity of the connection.

It's important to follow the proper installation procedures and guidelines provided by the manufacturer and supplier of the S32750 Super Duplex Steel Threaded Flanges to ensure a reliable and leak-free connection.

Packing

1. Qingyan S32750 Super Duplex Steel Threaded Flanges Package by wooden case

2. Customized shipping mark

3. Each layer use plastic film and rubber sleeve to protect the surface